 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination CABLE RECEPtACLES WIth PIN CoNtACtS, CRIMP tERMINAtIoN, 790-024P Rugged, lightweight 790-024P connectors feature machined aluminum shells, fluorosilicone face seals and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Connector shell features a groove for attachment of a low-profile EMI backshell adapter 799-015, ordered separately. 790-024P Base Part Number Cable Receptacle with Pin Contacts C-13 Shell Size Insert Arr. See Table 1 for Available Insert Arrangements . To order a connector without size #16 or #12 power pins, substitute "W" instead of "P" in the insert arrangement. Example: 36P2 is supplied with 2 power pins. 36W2 is supplied less the power pins. See Section B for coaxial contacts purchased separately. Sample Part Number HOW TO ORDER M P Hardware Option Shell Finish Electroless Nickel general purpose applications 790-024P M 1000 Hour GreyTM maximum corrosion protection and durability (non-reflective grey) Nickel-PTFE MT Thru-Hole No Hardware N Female Jackpost P Zinc-Nickel with Black Chromate tactical applications (non-reflective black) ZNU Low-Profile Captivated Jackscrew, Hex Head L Slot-Head Extended Jackscrew K Additional shell finishes are listed on page C-9. Low-Profile Captivated Screwlock, Hex Head S Slot-Head Extended Captivated Screwlock T SPECIFICATIONS Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration (c) 2009 Glenair, Inc. www.glenair.com MATERIALS AND FINISHES Shell Contacts Insulators Retention Clips Interfacial Seal, Grommet Hardware Aluminum alloy Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Beryllium copper alloy Flourosilicone rubber 300 series stainless steel Printed in U.S.A. E-Mail: sales@glenair.com #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65 C. to +150 C. 300 g. 37 g. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 Rev. 04-July-2009 D-1 Cable Connectors A B C D E F G H INDEX Cable Connectors Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination Table 1 Contact Arrangements CRoSS-SECtIoNAL vIEW oF 790-024P REAR INSULATOR GROMMET POTTING WIRE (REF.) RETAINING CLIP INTERFACIAL SEAL PIN CONTACT FRONT INSULATOR GROOVE FOR EMI ADAPTER 3 5 9 19 4 3 2 2 A B C D E F G H INDEX INDEX Layout A-5 B-2P2 B-9 C-13 D-15 D-3P3 D-7P2 E-11P2 E-19 E-7P3 #23 #16 #12 5 2 9 13 15 Contact Quantity Face View SHELL TABLE 2 HARDWARE OPTION .190 (4.83) MAX F-15P2 13 2 F-23 F-5P5 G-33 h-10P4 33 6 4 23 5 Connector is supplied with thru-holes. Shell sizes H and L are .148" (3.76) diameter, other shell sizes are .092" (2.34) diameter. Accepts standard Micro-D M83513 hardware. .155 (3.94) MAX No Mating Hardware N Connector is supplied with removable jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Stainless steel. Conforms to M83513/05. .925 (23.5) MAX Jackposts P h-29P7 22 7 H-36P2 34 h-54P2 52 2 H-5P5 H-66 66 5 2 Connector is supplied with stainless steel nonremovable low profile jackscrews. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Hex Head Jackscrews L Connector is supplied with stainless steel slot head non-removable jackscrews. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. K Extended Jackscrews J-17P4 13 4 J-25P2 23 2 J-33 J-7P7 33 7 .290 (7.37) MAX .925 (23.50) MAX K-27P4 23 4 K-35P2 33 2 K-43 K-9P9 L-6P6 (c) 2009 Glenair, Inc. www.glenair.com 43 9 6 Connector is supplied with stainless steel nonremovable low profile screwlocks. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Screwlocks allow the connector to be mated before the screws are fastened. Hex Head Screwlocks S Connector is supplied with stainless steel nonremovable slot head screwlocks. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Screwlocks allow the connector to be mated before the screws are fastened. Extended Screwlocks T Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 Rev. 04-July-2009 D-2 Series 79 Micro-Crimp Section D: Cable Connectors, Crimp Termination 790-024P DIMENSIoNS A MAX B BASIC C MAX .308 (7.82) MAX .096/.088 (2.44/2.24) DIA 2 PLACES .195 .003 (4.95 0.08) .093 .005 (2.36 0.13) GROOVE FOR ATTACHMENT OF EMI ADAPTER 799-015 .760 (19.30) MAX .096/.088 (2.44/2.24) DIA 2 PLACES 1.435 (1.80) MAX 1.215 (30.86) BASIC 1.079 (27.41) MAX .395 (10.03) MAX .195 .003 (4.95 0.08) .093 .005 (2.36 0.13) .760 (19.30) MAX D MAX SHELL SIZE G E MAX F BASIC G MAX .410 (10.41) MAX .152/.145 (3.86/3.68) DIA 2 PLACES 1.055 (26.80) MAX SHELL SIZES A, B, C, D, E, F, J, K .195 .003 (4.95 0.08) .093 .005 (2.36 0.13) .760 (19.30) MAX SHELL SIZE H AND L 790-024P DIMENSIoNS Shell Size A B C D E F H J K L A Max. In. mm. .785 .935 1.085 1.185 1.335 1.485 -- 1.845 2.240 -- 19.94 23.75 27.65 30.10 33.91 37.72 -- 46.86 56.90 -- H MAX B Basic In . mm. .565 .715 .865 .965 1.115 1.265 -- 1.615 2.015 -- 14.35 18.16 21.97 24.51 28.32 32.13 -- 41.02 51.18 -- C Max. In. mm. .400 .551 .701 .801 .951 1.101 -- 1.460 1.860 -- 10.16 14.00 17.81 20.35 24.16 27.96 -- 37.08 47.24 -- D Max. In. mm. .390 .540 .690 .790 .940 1.090 -- 1.450 1.840 -- 9.91 13.72 17.53 20.07 23.88 27.69 -- 36.83 46.74 -- E Max. In. mm. -- -- -- -- -- -- -- -- -- -- -- -- 2.175 55.25 -- -- -- -- 2.420 61.47 F Basic In. mm. -- -- -- -- -- -- -- -- -- -- -- -- 1.800 45.72 -- -- -- -- 2.036 51.71 G Max. In. mm. -- -- -- -- -- -- -- -- -- -- -- -- 1.450 36.83 -- -- -- -- 1.686 42.82 H Max. In. mm. -- -- -- -- -- -- -- -- -- -- -- -- 1.440 36.58 -- -- -- -- 1.675 42.55 Printed in U.S.A. (c) 2009 Glenair, Inc. www.glenair.com Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 Rev. 04-July-2009 D-3 E-Mail: sales@glenair.com Cable Connectors A B C D E F G H INDEX INDEX |
Price & Availability of 790-024PC-13MT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |